A major milestone has been reached on the Mersey Gateway Project as the first stay cable connecting the Mersey Gateway south pylon to the main bridge deck has been installed.
Workers installed the 52-metre long cable at the south pylon in the Mersey estuary yesterday (27 October 2016).
The stay cable is one of 146 that will support Halton’s new 1,000-metre long reinforced concrete bridge. Each will consist of up to 91 individual steel strands that sit inside a stay pipe – the outer casing that provides protection from weather-related corrosion.
810 miles of the strands will be used on the project, with each strand needing to be installed individually.
Merseylink’s Design Manager, George Moir, said: “The first two strands are threaded through the stay pipe then the tower crane lifts the pipe up to the anchor point in the upper pylon where the top ends of the strands are fixed into place.
“The bottom ends of the strands are then attached to the anchor point in the bridge deck and stressed using a hydraulic system. This enables us to get the correct level of tension needed to support that segment of bridge deck.
“We then use a winch system through the stay pipe to winch the remaining strands up one by one. Once all of the strands have been installed they sit in parallel inside the stay pipe to form the stay cable.”
The 146 stay cables have a total load bearing capacity of about 53,500 tonnes and varied lengths, with the shortest is approximately 41 metres and the longest measures around 226 metres.
Form traveller machines are casting the deck segments from each side of the three pylons and the stay cables will be installed along the bridge once the concrete has reached the necessary strength.
Gareth Stuart, Project Director of the Merseylink construction joint venture, commented: “This marks a momentous occasion for the project. The stay cables will be an iconic feature of this landmark structure making it one of the most recognisable bridges in the UK.
“We’re now entering a new, very visual phase of the bridge construction, where people will be able to see the stay cables connected to the bridge deck as it emerges across the river week by week.”
The iconic design of the Mersey Gateway bridge is based on a cable-stayed structure with three pylons.
At 80 metres high, the central pylon will be shorter than the two outer pylons, which at 110 metres high (north pylon) and 125 metres high (south pylon) will give the bridge a distinct appearance.
Cllr Rob Polhill, Leader of Halton Borough Council, said: “The installation of the first stay cable is a real milestone in the Mersey Gateway construction. It’s been fascinating to see the works in the estuary progress so far, and we’re now set to see truly incredible scenes as our new bridge pylons are anchored to the deck. The landscape of Halton is changing and I would encourage everyone to catch a glimpse of the exciting progress.”
If you would like to read more articles like this then please click here