Mechanical Mine Clearance System Market: Introduction
A mine is an explosive used by the ground force military personnel to neutralize the enemy. It is buried just beneath the surface of the ground and is activated by pressure when enemy personnel or vehicle stumbles upon it. Land mines and anti-tank mines were popular enemy neutralizing techniques used during the World War I and still being used. Though mines are only to be installed in designated active war zones, after the war, mines are seldom removed from the surface of the land or deactivated thereafter making that piece of land safe. Mechanical mine clearance systems are demining systems that deliberately activate the mines and clear the surface. These systems are usually armored vehicles designed specifically to withstand and absorb the explosive force of the mines with little to no damage to the system and the surroundings.
TOC of this report is available upon request @ http://www.persistencemarketresearch.com/toc/13216
Mechanical Mine Clearance System Market: Dynamics
Mechanical mine clearance market is primarily driven by the requirement of clearing a piece of land from mines for other purposes. Rapid urbanization, industrialization and construction projects call for utilizing an unused piece of land, this helps in the growth of mechanical mine clearance systems. An usual sight observed near the area of mines is poor fencing and warning displays causing stray travelers and children to unknowingly cross it, this has caused many mishaps and incidents prompting the regulatory bodies to implement measures in clearing the mines leading to an expansion in the mechanical mine clearance system market growth.
Mines are traditionally cleared by the usage of simple metal detectors by the clearing personnel that could be dangerous if the personnel accidently steps on it, complications further arises if the mines buried within the surface is made of plastic or other material that cannot be detected by the metal detector, hence for safety reasons mechanical mine clearance system is the best way to clear a piece of land from mines, further enhancing the growth of the market.
According to a research published by Landmine Monitor in 2016, over 6,400 casualties of mine blast were recorded in 2015 increasing the number of casualties by 75% from the number of casualties recorded in 2014. As of 2016, over 60 countries spread across the globe have been recorded to contain mines within its vicinity. Mine Ban Treaty, popularly known as the Ottawa Treaty is a convention aimed at the clearance of mines and banning the manufacture of mines altogether which can help in boosting the growth of mechanical mine clearance system market.
Some of the important restraints associated with mechanical mine clearance market system are high cost of the system. Since, these systems are basically constructed similar to an earth mover with additional armoring as a standalone product, high costs are inevitable. The systems are also subjected to extreme forces, hence maintenance costs associated with mechanical mine clearance system can also be very high, thereby hampering the growth of the market. Another point to be noted is that many countries that were previously contaminated with mines have been completely cleared off by traditional methods that can severely dent the growth of the mechanical mine clearance system market.
Mechanical Mine Clearance System Market: Segmentation
On the basis of Product Type, Mechanical Mine Clearance System can be segmented as:
- Demining Vehicles
- Demining Mounts
- Mine Flail
- Mine Plough
On the basis of Operation, the market can be segmented as:
- Manned Operation
- Remote Control Operation
Mechanical Mine Clearance System Market: Regional Outlook
The Mechanical Mine Clearance System market can be segmented into seven geographical regions such as Asia Pacific excluding Japan, North America, Latin America, Western Europe, Eastern Europe, Japan and Middle East & Africa. Fruitful growth of mechanical mine clearance system can basically be concentrated on countries that are still contaminated with mines. A few examples are Somalia, Bosnia, Kuwait, Cambodia, Iraq, Afghanistan, Angola, Iran, Egypt, etc.
Mechanical Mine Clearance System Market: Participants
Examples of some of the participants identified in the manufacture of Mechanical Mine Clearance System market are
- The Hydrema Group
- Rheinmetall AG
- Aardvark Clear Mine Ltd.
- BAE Systems Plc
- Digger DTR
- KMMCS - Maschinelle Minenräumung und Bodensanierung
- Caterpillar Inc.
- Pearson Engineering Limited
- Patria Oy
- Scanjack AB
The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to categories such as market segments, geographies, types and applications.
The report covers exhaustive analysis on:
- Market Segments
- Market Dynamics
- Market Size
- Supply & Demand
- Current Trends/Issues/Challenges
- Competition & Companies involved
- Value Chain
Regional analysis includes:
- North America
- Latin America
- Asia Pacific
- Western Europe
- Eastern Europe
- Middle East & Africa
The report is a compilation of first-hand information, qualitative and quantitative assessment by industry analysts, inputs from industry experts, and industry participants across the value chain. The report provides an in-depth analysis of parent market trends, macroeconomic indicators and governing factors, along with market attractiveness within the segments. The report also maps the qualitative impact of various market factors on market segments and various geographies.
Sample of this report is available upon request @ http://www.persistencemarketresearch.com/samples/13216
- Detailed overview of parent market
- Changing market dynamics in the industry
- In-depth market segmentation
- Historical, current and projected market size in terms of volume and value
- Recent industry trends and developments
- Competitive landscape
- Strategies of key players and products offered
- Potential and niche segments, geographical regions exhibiting promising growth
- A neutral perspective on market performance
- Must-have information for market players to sustain and enhance their market footprint
Persistence Market Research (PMR) is a third-platform research firm. Our research model is a unique collaboration of data analytics and market research methodology to help businesses achieve optimal performance.
To support companies in overcoming complex business challenges, we follow a multi-disciplinary approach. At PMR, we unite various data streams from multi-dimensional sources. By deploying real-time data collection, big data, and customer experience analytics, we deliver business intelligence for organizations of all sizes.
Persistence Market Research
7th Floor, New York City,
NY 10007, United States,
USA - Canada Toll Free: 800-961-0353