DIY Snow Foam Pressure Pump

This Instructable will show you how to change ordinary garden pressure pump in a snow Foam Pump(KEXON).Feel free to help improve this instructable.

Step 1: What You Will Need.Things that you will need:-Pressure pump 1.5 or 2L,-2 luer lock syringe 10mL,-Something to cut (scalpel/knife..),-Scissor,-Plies,-Wrench,-Flat spray nozzles F110 (015, 02, 03, 04, 05),-Needle to puncture,-Glass wool,-Sponge, optional to decrease the water flow.Step 2: Disassemble the Original Nozzle/tip:With the wrench and your hand do a small pressure to remove/tear the tip off

Step 3: Syringe:Test if the tip will fit in the pressure pump.Step 4: 1st Syringe:1st Syringe do as the pictures,Cut the "tail" and enlarge the tip.Step 5: 2nd Syringe:Do as the pictures,Cut the tip off and enlarge the role until you can fit the flat nozzle,Take the rubber plunger off, cut a hole.Step 6: Two Syringes Together:The two syringes will be like this.Step 7: Fill With Glass Wool and Cap It:Fill the big barrel with the glass wool.Be aware of that maybe you will have to put more or less glass wool to produce more or less foam.Usually: more shampoo = less glass wool; less shampoo = more glass wool.To cap one syringe on another, you have to enlarge the plastic.

Step 8: The Pump:Make a hole with the needle, it will make air mix with the shampoo+water.Step 9: Assmebly Togheter:You can use the original tip to make foam too, you just have to fill with glass wool and use with the pressure pump.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging.

Click Foam Pump Manufacturers to learn about more information