Topics: Architecture

  • ALLPLAN receives major order from Autobahn GmbH of the German Federal Government

    ALLPLAN has received a major order from the Autobahn GmbH of the German Federal Government. With the introduction of a uniform solution for the core processes of design, construction, operation and maintenance, Europe's largest infrastructure operator will in future rely on Allplan as a cross-disciplinary platform that accompanies and integrates the design and construction process.

  • Verify the load-bearing capacity for pile foundations comprehensively and reliably

    If soil or rock layers with insufficient load bearing capacity have to be bridged in the subsoil during construction work, pile foundations are used. To make sure that the piles provide a safe foundation for supporting structures complex requirements, such as the non-linear resistance-settlement curve, and special foundation-specific actions must be considered.

  • Nemetschek Group drives Efficiency in the Construction Industry by Investing in Innovative Start-Ups

    The construction industry has been suffering from inefficient processes and a very low increase in productivity over the last several decades. The Nemetschek Group is set to change that. Investing in highly innovative startups in addition to its own portfolio is proving to be the right strategy. A customer case study by Imerso AS showcases efficiency increases of 400 percent in quality control.

  • Nemetschek Group: Looking back on a Successful and Exciting Year

    Advancing digitalization, increasing interest in sustainability in the construction industry, more personal contacts again, and a successful fiscal year 2021: The Nemetschek Group, one of the world's leading software suppliers for the AEC/O and media & entertainment industry, is drawing a positive conclusion – despite the challenges of the COVID 19 pandemic.

  • Nemetschek Group Announces Strategic Investment in Norwegian Start-up Imerso

    The Nemetschek Group has led a financing round for Imerso AS. The Norway based deep-tech company is offering a next-generation platform to automate construction quality monitoring through a combination of advanced artificial intelligence (AI), reality capture, and BIM technologies.

  • FRILO optimises its BIM Connector® with the latest software update

    Since 18 November, structural engineers have had access to the latest version of the FRILO software for structural analysis. Within this update, the provider of innovative solutions for structural analysis and structural design is launching a completely new solution for pile foundations in addition to numerous helpful functional enhancements in existing programmes.

  • Nemetschek Group with 10 Brands at BIM World Munich 2021

    BIM World Munich 2021 is opening its doors tomorrow. Ten brands of the Nemetschek Group, one of the world's leading software vendors for the AEC/O industry, will present themselves on site with lectures, workshops, and a joint booth.

  • Nemetschek Group joins the Kennedy network of Madaster

    The Nemetschek Group joins the Madaster Kennedy Network as the 23rd company. This expands the network to include a crucial aspect of the value chain: software solutions for the construction lifecycle. Madaster is the global cadaster for materials, buildings, and infrastructure. Architecture and planning offices can thus realize sustainable buildings more easily and promote the reuse of materials.

  • Nemetschek Group wins four Construction Computing Awards

    The Nemetschek Group, one of the world's leading software solution providers for the AEC/O and media industry, was once again very successful at the prestigious Construction Computing Awards, also known as “The Hammers.” The Nemetschek brands Graphisoft, Solibri, and Vectorworks received awards for their digital solutions, service offerings, and innovative strength.

  • Hybrid Working: A Matter of Reputation?

    Koen Mattjis, Chief Division Officer, Operate & Manage Division of the Nemetschek Group, discusses the importance of hybrid and flexible work scenarios for employees – and employers. 18 months into the COVID-19 pandemic and with the hope of a return to normalcy in the near future, companies are starting to shift from COVID-19 solutions to thinking strategically about the office of the future.

  • Success for ALLPLAN’s First Global Summit

    On the 21st and 22nd of October, ALLPLAN hosted their first ever industry conference, Build the Future – ALLPLAN Global Summit. Open to all AEC industry professionals, the online event provided attendees with valuable learning opportunities covering how to tackle some of the biggest industry challenges and the latest news on Allplan 2022.

  • ALLPLAN's productivity boost for precast projects: Introducing Planbar and Tim 2022

    ALLPLAN, global provider of BIM solutions for the AEC industry, today announced the global rollout of its new BIM software for prefabrication. Planbar and TiM 2022 provide an integrated working method for engineering offices, precast plants and internal design departments, from the initial design to the successful implementation on the construction site.

  • NEVARIS BUILD 2022 NEW VERSION

    NEVARIS presents the new version of the construction software NEVARIS Build 2022 at the end of the year, one of the core products from the software portfolio for holistic construction and construction management solutions. Innovations include extensive construction business functions for simple invoice management and construction evaluation.

  • Nemetschek Group: Strong presence at trade fairs and events this Fall

    After almost two years without physical events, relevant trade fairs for the construction industry are finally taking place in person. The brands of the Nemetschek Group, one of the world’s leading software vendors for the AEC/O industry, will be presenting at events in the next few months: at BIM World Munich, Digital Construction Week, the Allplan Global Summit and the Vectorworks Design Summit.

  • Allplan Bridge 2022: The Evolution in Modeling for Precast Girder Bridges

    ALLPLAN, the global provider of BIM solutions for the AEC industry, today announced the availability of Allplan Bridge 2022. Allplan Bridge is the world’s first BIM software that enables bridge engineers to work from the creation of a parametric 4D model to structural analysis, reinforcement design and detailing with one single solution.

  • Allplan 2022: Optimal buildability through seamlessly integrated processes

    Allplan 2022 provides an integrated working method for architects, engineers, and contractors on a single platform, from the initial design to the successful implementation on the construction site. The new version supports the thorough capture of the construction environment, with functionalities for terrain modeling and road design.

Show more
Enter your email address to follow Nemetschek SE

When you choose to create a user account and follow a newsroom your personal data will be used by us and the owner of the newsroom, for you to receive news and updates according to your subscription settings.

To learn more about this, please read our Privacy Policy, which applies to our use of your personal data, and our Privacy Policy for Contacts, which applies to the use of your personal data by the owner of the newsroom you follow.

Please note that our Terms of Use apply to all use of our services.

You can withdraw your consent at any time by unsubscribing or deleting your account.
Check your inbox

Email sent to __email__. Click the link there to follow Nemetschek SE.

Okay