Gå direkt till innehåll
VertiZontal - Most innovative feature of shaft alignment world!

Nyhet -

VertiZontal - Most innovative feature of shaft alignment world!


VertiZontal

Fixturlaser has developed an adaptive user interface, i.e. a user interface that actually tells you what to do based on your measurement results. With the VertiZontal Moves feature, we have brought to you one of the most innovative and time saving features in the shaft alignment world. The adaptive user interface shows how much a misaligned machine requires to be adjusted by adding or removing shims at the machine’s feet. When proceeding with the measurement, you no longer need to remeasure in between the vertical and the horizontal adjustment during the adjustment process. The following horizontal adjustment is promptly carried out with real values displayed.

If the machine is misaligned, you will be recommended to go to a shims result view. Our Fixturlaser NXA and Fixturlaser EVO calculates how much you need to remove or add shims in order to correct the machine vertically. When moving on to horizontal correction, the system goes live and will deliver real time values during the adjustment phase. No remeasurements in between adjustments are necessary, as you are never in doubt of the machine’s true position.

Our function VertiZontal will give you precise insctructions on how to align your machine. As you can see every modification appeared in real time on the display unit and will allow you save time and energy.

Ämnen

Kategorier

Kontakter

Relaterat innehåll

  • Using the Verti-Zontal Process on Wind Turbines with Adjustable Chocks

    Using the Verti-Zontal Process on Wind Turbines with Adjustable Chocks

    The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves™ – where you only have to measure once before making the required vertical and horizontal adjustments. Quite a time conserver in a time strained maintenance world!