Nidec

30 March 2022 03:36

Nidec Servo Launches Motors with Can-Bus, a Communication Function for Vending Machines for the first time in the world*

Nidec Servo Corporation (the “Company” or “Nidec Servo”) announced today that it has launched the world’s first* brushless DC motors equipped with Can-Bus, a communication function for vending machines’ product pay-out mechanisms.

Can-Bus (Controller Area Network-Bus), a type of vehicle bus, or an internal communications network that interconnects devices inside a vehicle or a train, enable

29 March 2022 03:38

Dyneo+, the new range of connected motors with very high efficiency levels

Nidec Leroy-Somer announces Dyneo+, its new range of super premium efficiency permanent magnet-assisted synchronous reluctance motors. Combining the performance of synchronous permanent magnet technology with the easy set-up of induction motors, the Dyneo+motors have been designed to meet the most stringent requirements of industrial applications while offering them even more options using digital

16 March 2022 02:59

Nidec Develops the World’s Thinnest-class Linear Vibration Motor

Nidec Corporation (TSE: 6594; OTC US: NJDCY) (the “Company” or “Nidec”) announced today that it has developed the world’s thinnest-class linear vibration motor (the “Slider”).
A number of commercially available smartphones and smartwatches equipped with a vibration motor nowadays. Though, in the past, an eccentric motor was used to create a simple pattern of vibration to notify users of an inco

10 March 2022 19:14

Nidec Develops Linear Vibration Motors with Smallest-class Diameters in the World

Nidec Corporation (TSE: 6594; OTC US: NJDCY) (the “Company” or “Nidec”) announced today that it has developed a series of linear vibration motors with smallest-class diameters in the world (the “CA series”).

A number of commercially available smartphones and smartwatches equipped with a vibration motor nowadays. Though, in the past, its primary purpose was to vibrate in a certain pattern t

28 December 2021 04:03

Nidec Receives 2021 Bosch Global Supplier Award from Bosch Group

Nidec Corporation (TSE: 6594; OTC US: NJDCY) (the “Company” or “Nidec”) announced today that the Nidec Group has received a Bosch Global Supplier Award from Germany’s Robert Bosch GmbH, a global supplier of technology and services, in the “Purchasing of direct materials – Consumer Goods” category. This is the second time for our Group to receive this Award since 2017, when we were selected for the

Yadea’s 換電獣 01(Huan Dian Shou 01) and Nidec’s in-wheel motor for electric bikes

27 December 2021 02:33

Nidec’s In-wheel Motor for Electric Motorcycles is Adopted by China’s Largest Electric Two-wheel Vehicle Manufacturer for the First Time

Nidec Corporation (TSE: 6594; OTC US: NJDCY) (the “Company” or “Nidec”) announced today that its in-wheel motor has been adopted for the first time for 換電獣01(Huan Dian Shou 01), an electric motorcycle released by Yadea Group Holdings Ltd. (“Yadea”) in October 2021.

China’s largest manufacturer specialized in two-wheel vehicles, Yadea has more than 50 million users in 80-plus countries a

WHILL-“WHILL Model F” and Nidec’s driving motor

17 December 2021 04:40

Nidec’s Driving Motor is Adopted for WHILL’s Foldable Mobility Product, “WHILL Model F”

Nidec Corporation (TSE: 6594; OTC US: NJDCY) (the “Company” or “Nidec”) announced today that its driving motor has been adopted for use in WHILL Model F, the foldable personal electric vehicle launched by WHILL Inc. (“WHILL”) on November 01, 2021. For this product, WHILL became the only Japanese company to win “Best of Innovation Award” in “Accessibility” division of CES 2022, the world’s largest

Rendering of the finished new factory, Nidec Electric Motor Serbia

10 December 2021 07:12

Nidec Holds Groundbreaking Ceremony to Mark the Construction of New Factory in Serbia

Nidec Corporation (TSE: 6594; OTC US: NJDCY) (the “Company” or “Nidec”) today held a ceremony of laying the foundation stone for the construction of its new factory in Novi Sad, Serbia.

1.Groundbreaking Ceremony
Today’s event, held at the factory constuction site in the city of Novi Sad in Serbia, was attended by the President of the Republic of Serbia Mr. Aleksandar Vučić, the Mayor of

17 November 2021 23:35

Nidec to Execute a Capital Alliance Agreement to Purchase Stake in OKK Corporation via Third-party Share Allocation

Nidec Corporation (TSE: 6594; OTC US: NJDCY) (the “Company” or “Nidec”) announced today that its Board of Directors has approved, among others, a resolution to purchase the shares of OKK Corporation (“OKK”) through a third-party allocation of common shares in a meeting of the Board of Directors held on November 18, 2021 (Japan time) (the “Share Purchase”), and that the Company has executed a capit

22 October 2021 06:17

尼得科机床隆重推出龙门五面加工中心的最新产品「MVR-Hx」系列　加速发展扩大大型机床的市场

◆广泛应用于大型部件加工，更便于客户的选型
◆适用于高精度・高效率加工
尼得科机床株式会社（社长：若林谦一总公司：滋贺县栗东市）10月12日隆重推出龙门五面加工中心的高端机型「MVR-Hx系列」。继之前推出的MVR-Cx系列，进一步扩充并完善了产品线，以适应大型部件加工的市场需求。连续投入覆盖日本及海外所有市场的新机型并加大加快销售活动的力度，从而进一步实现我司机床事业的扩大发展。
MVR-Hx系列，是面向高精度・高效率加工的客户群，从没有热变位且更易于操作的概念出发而新开发的机型。通过抑制主轴热延伸的轴心冷却功能以及不受环境温度变化的构造主体等抗热对策的彻底实施，可以适用于，从模具等追求表面高品质的加工到一般部件的加工，从轻型切削到重切削的各种素材等广泛范围的加工。由内部冷却主轴的轴心冷却功能为标准配置。即使是在8,000转/分的高速运转时也可以保持刀具先端位置的稳定

22 October 2021 06:08

尼得科机床成立后首次推出新产品「MVR-Cx」系列大型机床事业发展扩大的第一弹

◆投入新产品扩充产品阵容
◆对应大型零件加工的广泛市场需求
尼得科机床株式会社（社长：若林谦一总公司：滋贺县栗东市）8月2日成为日本电产株式会社旗下之后，作为首个新产品的龙门五面加工中心“MVR-Cx系列”将投入市场并开始销售。本公司2026年3月期的销售目标为1000亿日元，大型机床将作为核心事业继续扩大发展。MVR-Cx系列被定位为新产品的第一弹，将于10月12日～15日，18日～20日在栗东工厂新设的大型机床展厅举行“新产品发布会”。
MVR-Cx系列适用于制罐构造物等一般大型零件加工，可以高效进行单一品种或多品种少批量生产且操作简单易行。标准搭载了新开发的操作支援功能“Nidec Navi”，大大缩短了从工作开始到完成出货的生产时间。操作上准备了丰富的原创画面，简化了单一产品和多品种少量生产所需的程序制作和调试，以及加工前被加工物的定芯等加工初期设定。通过指导功

22 October 2021 05:56

Nidec Machine Tools Launch “MVR-Hx” New Series of Double-Column Machining Centers To accelerate the expansion of its Large-Scale Machine Tool Business

Lineup to cover a wide range of large parts processing for ease of choiceIdeal for users who pursue high precision and high efficiency
Ritto City, Japan - Nidec Machine Tool Corporation (President: Kenichi Wakabayashi, Head Office: Ritto City, Shiga Prefecture) will launch the MVR-Hx Series of double-column machining centers on October 12. Following the MVR-Cx series released earlier this month

News archive