Nyhet - 9 December 2015 09:32

BLDC with high power density

With the DB80, Nanotec presents an EC motor which – relative to its size – exhibits exceptionally high power density. Featuring a rated speed of 3000 rpm and a rated voltage of 48 V, this 8-pin motor is particularly suitable for applications which require a high degree of efficiency; for example in service robotics or automated guided vehicle systems. The DB80 has a flange size of 80 x 80 mm and is available with Hall sensors or encoder. Four lengths cover a performance range from 280 to 940 W.

Additional high-performance planetary gear systems can be mounted for high torques. Customer-specific versions with other windings or wave forms are also offered. Soon the DB80 will also be available with integrated electronics under the model name PD6-CB80.

Your Reseller
SOLECTRO AB
www.solectro.se

Ämnen

Kategorier

Regioner

Skåne

Kontakter

Karoline Ljung

Presskontakt karoline.ljung@solectro.se +46 (0)40 53 66 23

Relaterat innehåll

2 December 2015 10:00

Easy programming with Plug & Drive Studio

A new software is available for easy setup and programming of Nanotec’s motor controllers: Plug & Drive Studio. The controller can now be accessed from a PC via a variety of field buses (CANopen, Ethernet, Modbus).

2 December 2015 10:05

High-performance DC motor with integrated controller

With the PD6-C Nanotec introduces a brushless DC servo motor with integrated controller that delivers very high power density in relation to its size.

17 November 2015 11:23

Den lilla stegmotorstyrningen SMCI33 är till stor hjälp vid maskinoptimering i och med enkel, snabb och flexibel programmering.

Nanotecs SMCI33-controller är lätt att programmera med den tillhörande programmerings-mjukvaran.
Man kan snabbt och enkelt, även utan programmeringskännedom, programmera komplexa körprofiler (parametrar som strömvärde och steg-upplösning samt sträcka, hastighet, ramp,
paus och loopar, sammanlagt 16 rader) som därefter kan överföras till SMCI33-2 via RS485
eller USB.
Nanotecs SMCI3

28 Oktober 2015 10:53

Nanotec - Slotless BLDC motors for high-speed applications

or high-speed applications, such as drills, grinders, or tattooing instruments, the slotless BLDC motor DS16 from Nanotec is a highly efficient solution. The stator of the DS16 consists of ring-shaped plates with a flat winding on the inside. Since the windings don’t have an iron core, the motor's inductance is very low and the current rises rapidly.