Easy palletizing with collaborative robot

FlexLink releases a new updated version of their standardized palletizing cell with collaborative robot. The new palletizing unit is easy to install and configure, has a compact design and reduces the footprint by over 50% compared to cells with industrial robots.

The collaborative robot is a single pick unit, working up to 8 boxes per minute with a maximum load of up to 8 kg each. Its user-safe, making a fence system or a cage unnecessary and instead lets the operator work side-by-side with the robot. The cell permits continuous operations where the operator easily can remove one complete pallet without stopping the collaborative robot.

Modular and easy to move

The palletizing solution is delivered with one electrical cabinet driving both the conveyor and the robot. The electrical cabinet has a maximum capacity of 1200 VA, single phase 50/ 60 Hz. It can be powered by both 110V and 230V and is delivered with both options.

Easy to install and configure

The smart design with quick connectors contributes to a fast and easy installation in only a couple of hours. FlexLink’s tablet application with intuitive interface ensures easy layer configuration, without any need for complicated robot programming. The layer configuration application cuts down the installation time as well as the education/ introduction time for the operator thanks to its user friendly software with drag-and-drop interface. It is possible to run several cells from one tablet.

The palletizing solution comes in several different modifications such as conveyor positions, grippers, and pedestal lengths. All modifications can be made in your ordered.