Air Bearings Market Size, Share, Growth, Trends, Scope, and Forecast 2020 - 2027

The air bearings market size is expected to reach over US$ 14 billion by 2027, the increasing demand for maximizing energy efficiency is expected to bolster the growth of the global air bearings market during the forecast period.

Globally, revenue generated by the air bearings market is estimated to reach US$ 8 Bn in 2019, and expand at a CAGR of 7% in terms of value throughout the forecast period 2020 to 2027.

In air bearings, the balls are replaced by a cushion of air. The most common application of air bearings is the hovercraft. Large fans blow underneath the hovercraft and the air is trapped under a flexible rubber 'skirt'. This cushion not only supports the craft’s weight but also acts as a soft spring, which allows it to smoothly float over water or land. A similar principle is used by air bearings, where high pressure air is fed into the gap between stationary bearings and a rotational shaft. The gap is very small - around 1/100 of a millimetre, allowing the air pressure to be maintained within the bearing.

This bearing can also support its entire designed load at zero speed. Aerostatic bearings can be used with low heat with accurate rotation. Additionally, aerostatic bearings are less rigid and are easier to handle smaller load capacities. Aerostatic bearings are useful in multiple applications such as micro-positioning, machining, and grinding that require frictionless superior performance at zero speed.

Get Sample Pages of Report@ https://www.visionresearchreports.com/report/sample/34926

Air bearings are commonly used to support linear variable differential transformer (LVDT) cores to improve reliability and reduce gauging forces. Aerostatic bearings do not suffer from friction-induced wear, and additionally, they have no starting and stopping friction. Aerostatic bearings are popularly used in grinding, machining, and micro positioning applications, where full performance at zero speed and the absence of friction is extremely vital.

A Key Driver

• Most end users such as automotive, aerospace, semiconductors, optics, metrology, oil and gas, and medical are using high-precision tools and spindles in manufacturing to expand their capacities. These tools require the use of air bearings, thereby increasing their industry demand.
• Air bearings are now also being used in semiconductor manufacturing, which requires high speed, short-stroke precision with repeatable nanometer level positioning, and a controlled environment. In optics, air bearings are used for ultra- precision positioning and motion with no lubricants or wear for demanding optical applications.

Buy this Full Research Report@ https://www.visionresearchreports.com/report/cart/34926

Technological Advancements to Drive the Demand for Air Bearings

• Air bearings used in various machinery need to be monitored and tested continuously in order to ensure reliability, consistency, efficiency, and cost effectiveness of the operations. With extensive R&D and technological advancements, the demand for hovercrafts, electronic products, aeronautics, and high-end audio is expected to surge, and consequently, will offer lucrative opportunities to the manufacturers of air bearings.
• With advancements in the technology of air bearings, future vehicles can be designed with an array of frictionless motion solutions to overcome the challenges in vehicle testing, which is expected to increase automotive sales across the globe.

Key Players

Key players operating in the global air bearings market include Air Bearings Ltd., APG-Neuros, Bladon Jets, Capstone Turbine Corporation, Honeywell International Inc., Hovair Systems Inc., IBS Precision Engineering, LAB Motion Systems, Specialty Components Inc., SKF, Seagull Solutions Inc., R&D Dynamics Corporation, PI Nelson Air Corp, OAV Air Bearings, Mohawk Innovative Technology Inc., and Leuven Air Bearings NV.

Prominent Regions

North America held the second-largest share in the air bearings market, accounting for 29.9% of the overall industry in 2018. Technological advancements and the flourishing automotive industry in this region are primarily driving the air bearings market. The industry competition for air bearings is high, and investment and technology thresholds in this industry are relatively high. The demand for air bearings for industrial machinery is also expected to be highly stimulated by rising global manufacturing activity, which helps increase associated fixed investment expenditures. The dominance of the automotive industry over the years in the U.S has resulted in a rise in the demand for air bearings. Moreover, investments in research and development have also led to the strong growth of the automotive and space aviation industry in the U.S.

Asia Pacific dominates the air bearings market, and is expected to grow at a CAGR of ~ 8%. The region accounted for a 34.1% share of the overall air bearings market in 2018. Growth in the Asia Pacific market is attributed to expansion of the aviation industry and rapid industrialization in the region. Manufacturers of air bearings that are required for the steel industry are concentrated in Japan, Europe, China, and North America. China is the largest manufacturer of bearings for the steel industry, followed by Europe and North America.

Segmentation

Global Air Bearings Market by Type

• Aerostatic Bearings
• Aerodynamic Bearings

Global Air Bearings Market by Speed Capacity

• < 1,000 rpm
• 1,000 – 60,000 rpm
• > 60,000 rpm

Global Air Bearings Market by Application

• Precision Material Tools
• Coordinate Measuring Machines
• High Speed Machines
• Others

Global Air Bearings Market by End User

• Aviation/Space
• Medical
• Automotive
• Semiconductor
• Wastewater Management
• Others

Global Air Bearings Market by Region

• North America
  • U.S.
  • Canada
• Europe
  • Germany
  • France
  • U.K.
  • Italy
  • Spain
  • Russia & CIS
  • Rest of Europe
• Asia Pacific
  • China
  • India
  • Japan
  • ASEAN
  • Rest of Asia Pacific
• South America
  • Brazil
  • Mexico
  • Rest of Latin America
• Middle East & Africa
  • GCC
  • South Africa
  • Rest of Middle East & Africa

The Air Bearings market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.

The report provides size (in terms of volume and value) of Air Bearings market for the base year 2019 and the forecast between 2020 and 2027. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.

This report focuses on the global Air Bearings market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Air Bearings market development in United States, Europe and China.

It is pertinent to consider that in a volatile global economy, we haven’t just conducted Air Bearings market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.

In terms of production side, this report researches the Air Bearings capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.

In terms of consumption side, this report focuses on the consumption of Air Bearings by regions (countries) and application.

Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Air Bearings market. These figures have been provided in terms of both revenue and volume for the period 2016 to 2027. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.

With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Air Bearings market companies.

Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Air Bearings market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.

The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.

Overall, this is an in-depth research report specifically for the Air Bearings industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.

Air Bearings market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Air Bearings market.

Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Air Bearings market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.

Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Air Bearings market. These factors have benefited the growth of the global market for Air Bearings. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.

New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Air Bearings. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).

In this study, the years considered to estimate the market size of Air Bearings are as follows:

• History Year: 2016-2019
• Base Year: 2019
• Estimated Year: 2020
• Forecast Year 2020 to 2027

Reasons to Purchase this Report:

- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players

Research Methodology:

In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.

This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.

Market Size Estimation

Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).

The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.

Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.

All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.

Market Breakdown and Data Triangulation

After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.

Secondary Sources

Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.

Primary Sources

In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.

The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.

The study objectives of this report are:

• To analyze and study the global market capacity, production, value, consumption, status (2016-2019) and forecast (2020-2027);
• Focuses on the key manufacturers, to study the capacity, production, value, market share and development plans in future.
• Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
• To define, describe and forecast the market by type, application and region.
• To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
• To identify significant trends and factors driving or inhibiting the market growth.
• To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
• To strategically analyze each submarket with respect to individual growth trend and their contribution to the market
• To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market
• To strategically profile the key players and comprehensively analyze their growth strategies.

Table of Content

Section 1. Preface
1.1. Market Definitions and Overview
1.2. Market Segmentation and Scope
1.3. Key Research Objectives
1.4. Research Highlights
Section 2. Assumptions and Research Methodology
Section 3. Executive Summary
Section 4. Market Overview
4.1. Introduction
4.2. Market Dynamics
4.2.1. Drivers
4.2.2. Restraints
4.2.3. Opportunities
4.3. Key Trends Analysis
4.4. Key Market Indicators
4.5. Porter’s Five Forces Analysis
4.6. Value Chain Analysis
4.7. Industry SWOT Analysis
Section 5. Global Air Bearings Market Analysis and Forecast, By Type
5.1. Definitions/Key Segment Overview
5.2. Air Bearings Market Size (Thousand Units) (US$ Mn), By Type, 2017 - 2027
5.2.1. Aerostatic Bearings
5.2.2. Aerodynamic Bearings
5.3. Incremental Opportunity, By Type
Section 6. Global Air Bearings Market Analysis and Forecast, By Speed Capacity
6.1. Definitions/Key Segment Overview
6.2. Air Bearings Market Size (Thousand Units) (US$ Mn), By Speed Capacity, 2017 - 2027
6.2.1. <1000 rpm
6.2.2. 1000 – 60000 rpm
6.2.3. >60000 rpm
6.3. Incremental Opportunity, By Speed Capacity
Section 7. Global Air Bearings Market Analysis and Forecast, By Application
7.1. Definitions/Key Segment Overview
7.2. Air Bearings Market Size (Thousand Units) (US$ Mn), By Application, 2017 - 2027
7.2.1. Precision Metal Tools
7.2.2. High Speed Machines
7.2.3. Coordinate Measuring Machines
7.3. Incremental Opportunity, By Application
Section 8. Global Air Bearings Market Analysis and Forecast, By End-use
8.1. Definitions/Key Segment Overview
8.2. Air Bearings Market Size (Thousand Units) (US$ Mn), By End-use, 2017 - 2027
8.2.1. Aviation
8.2.2. Medical
8.2.3. Automotive
8.2.4. Semiconductor
8.2.5. Wastewater Management
8.2.6. Others
8.3. Incremental Opportunity, By End-use
Section 9. Global Air Bearings Market Analysis and Forecast, By Region
9.1. Definitions/Key Segment Overview
9.2. Air Bearings Market Size (Thousand Units) (US$ Mn), By Region, 2017 - 2027
9.2.1. North America
9.2.2. Europe
9.2.3. Asia Pacific
9.2.4. Middle East & Africa
9.2.5. South America
9.3. Incremental Opportunity, By Region
Section 10. North America Air Bearings Market Analysis and Forecast
10.1. Regional Snapshot
10.2. Key Trend Impact Analysis
10.3. Price Trend Analysis
10.4. North America Air Bearings Market Size (Thousand Units) (US$ Mn), By Type, 2016 – 2027
10.4.1. Aerostatic Bearings
10.4.2. Aerodynamic Bearings
10.5. North America Air Bearings Market Size (Thousand Units) (US$ Mn), By Speed Capacity, 2016 – 2027
10.5.1. <1000 rpm
10.5.2. 1000 – 60000 rpm
10.5.3. >60000 rpm
10.6. North America Air Bearings Market Size (Thousand Units) (US$ Mn), By Application, 2016 – 2027
10.6.1. Precision Metal Tools
10.6.2. Coordinate Measuring Machines
10.6.3. High Speed Machines
10.6.4. Others
10.7. North America Air Bearings Market Size (Thousand Units) (US$ Mn), By End-user, 2016 – 2027
10.7.1. Aviation/Space
10.7.2. Medical
10.7.3. Automotive
10.7.4. Semiconductor
10.7.5. Wastewater Management
10.7.6. Others
10.8. North America Air Bearings Market Size (Thousand Units) (US$ Mn), By Country & Sub-region, 2017 - 2027
10.8.1. U.S.
10.8.2. Canada
10.8.3. Rest of North America
10.9. Incremental Opportunity
Section 11. Europe Air Bearings Market Analysis and Forecast
11.1. Regional Snapshot
11.2. Key Trend Impact Analysis
11.3. Price Trend Analysis
11.4. Europe Air Bearings Market Size (Thousand Units) (US$ Mn), By Type, 2016 – 2027
11.4.1. Aerostatic Bearings
11.4.2. Aerodynamic Bearings
11.5. Europe Air Bearings Market Size (Thousand Units) (US$ Mn), By Speed Capacity, 2016 – 2027
11.5.1. <1000 rpm
11.5.2. 1000 – 60000 rpm
11.5.3. >60000 rpm
11.6. Europe Air Bearings Market Size (Thousand Units) (US$ Mn), By Application, 2016 – 2027
11.6.1. Precision Metal Tools
11.6.2. Coordinate Measuring Machines
11.6.3. High Speed Machines
11.6.4. Others
11.7. Europe Air Bearings Market Size (Thousand Units) (US$ Mn), By End-user, 2016 – 2027
11.7.1. Aviation/Space
11.7.2. Medical
11.7.3. Automotive
11.7.4. Semiconductor
11.7.5. Wastewater Management
11.7.6. Others
11.8. Europe Air Bearings Market Size (Thousand Units) (US$ Mn), By Country & Sub-region, 2017 - 2027
11.8.1. UK
11.8.2. Germany
11.8.3. France
11.8.4. Rest of Europe
11.9. Incremental Opportunity
Section 12. Asia Pacific Air Bearings Market Analysis and Forecast
12.1. Regional Snapshot
12.2. Key Trend Impact Analysis
12.3. Price Trend Analysis
12.4. Asia Pacific Air Bearings Market Size (Thousand Units) (US$ Mn), By Type, 2016 – 2027
12.4.1. Aerostatic Bearings
12.4.2. Aerodynamic Bearings
12.5. Asia Pacific Air Bearings Market Size (Thousand Units) (US$ Mn), By Speed Capacity, 2016 – 2027
12.5.1. <1000 rpm
12.5.2. 1000 – 60000 rpm
12.5.3. >60000 rpm
12.6. Asia Pacific Air Bearings Market Size (Thousand Units) (US$ Mn), By Application, 2016 – 2027
12.6.1. Precision Metal Tools
12.6.2. Coordinate Measuring Machines
12.6.3. High Speed Machines
12.6.4. Others
12.7. Asia Pacific Air Bearings Market Size (Thousand Units) (US$ Mn), By End-user, 2016 – 2027
12.7.1. Aviation/Space
12.7.2. Medical
12.7.3. Automotive
12.7.4. Semiconductor
12.7.5. Wastewater Management
12.7.6. Others
12.8. Asia Pacific Air Bearings Market Size (Thousand Units) (US$ Mn), By Country & Sub-region, 2017 - 2027
12.8.1. China
12.8.2. India
12.8.3. Japan
12.8.4. Rest of Asia Pacific
12.9. Incremental Opportunity
Section 13. Middle East & Africa Air Bearings Market Analysis and Forecast
13.1. Regional Snapshot
13.2. Key Trend Impact Analysis
13.3. Price Trend Analysis
13.4. Middle East & Africa Air Bearings Market Size (Thousand Units) (US$ Mn), By Type, 2016 – 2027
13.4.1. Aerostatic Bearings
13.4.2. Aerodynamic Bearings
13.5. Middle East & Africa Air Bearings Market Size (Thousand Units) (US$ Mn), By Speed Capacity, 2016 – 2027
13.5.1. <1000 rpm
13.5.2. 1000 – 60000 rpm
13.5.3. >60000 rpm
13.6. Middle East & Africa Air Bearings Market Size (Thousand Units) (US$ Mn), By Application, 2016 – 2027
13.6.1. Precision Metal Tools
13.6.2. Coordinate Measuring Machines
13.6.3. High Speed Machines
13.6.4. Others
13.7. Middle East & Africa Air Bearings Market Size (Thousand Units) (US$ Mn), By End-user, 2016 – 2027
13.7.1. Aviation/Space
13.7.2. Medical
13.7.3. Automotive
13.7.4. Semiconductor
13.7.5. Wastewater Management
13.7.6. Others
13.8. Middle East & Africa Air Bearings Market Size (Thousand Units) (US$ Mn), By Country & Sub-region, 2017 - 2027
13.8.1. GCC
13.8.2. South Africa
13.8.3. Rest of MEA
13.9. Incremental Opportunity
Section 14. South America Air Bearings Market Analysis and Forecast
14.1. Regional Snapshot
14.2. Key Trend Impact Analysis
14.3. Price Trend Analysis
14.4. South America Air Bearings Market Size (Thousand Units) (US$ Mn), By Type, 2016 – 2027
14.4.1. Aerostatic Bearings
14.4.2. Aerodynamic Bearings
14.5. South America Air Bearings Market Size (Thousand Units) (US$ Mn), By Speed Capacity, 2016 – 2027
14.5.1. <1000 rpm
14.5.2. 1000 – 60000 rpm
14.5.3. >60000 rpm
14.6. South America Air Bearings Market Size (Thousand Units) (US$ Mn), By Application, 2016 – 2027
14.6.1. Precision Metal Tools
14.6.2. Coordinate Measuring Machines
14.6.3. High Speed Machines
14.6.4. Others
14.7. South America Air Bearings Market Size (Thousand Units) (US$ Mn), By End-user, 2016 – 2027
14.7.1. Aviation/Space
14.7.2. Medical
14.7.3. Automotive
14.7.4. Semiconductor
14.7.5. Wastewater Management
14.7.6. Others
14.8. South America Air Bearings Market Size (Thousand Units) (US$ Mn), By Country & Sub-region, 2017 - 2027
14.8.1. Brazil
14.8.2. Rest of South America
14.9. Incremental Opportunity
Section 15. Competition Landscape
15.1. Competition Matrix
15.2. Company Profiles
[Company Overview, Product Portfolio, Financial Information (Subject to Data Availability), Business Strategies / Recent Developments]
15.2.1. APG Neuros
15.2.1.1. Company Overview
15.2.1.2. Product Portfolio
15.2.1.3. Financial Information (Subject to Data Availability)
15.2.1.4. Business Strategies / Recent Developments
15.2.2. Air Bearings Ltd
15.2.2.1. Company Overview
15.2.2.2. Product Portfolio
15.2.2.3. Financial Information (Subject to Data Availability)
15.2.2.4. Business Strategies / Recent Developments
15.2.3. Bladon Jets
15.2.3.1. Company Overview
15.2.3.2. Product Portfolio
15.2.3.3. Financial Information (Subject to Data Availability)
15.2.3.4. Business Strategies / Recent Developments
15.2.4. Capstone Turbine Corporation
15.2.4.1. Company Overview
15.2.4.2. Product Portfolio
15.2.4.3. Financial Information (Subject to Data Availability)
15.2.4.4. Business Strategies / Recent Developments
15.2.5. Honeywell International Inc
15.2.5.1. Company Overview
15.2.5.2. Product Portfolio
15.2.5.3. Financial Information (Subject to Data Availability)
15.2.5.4. Business Strategies / Recent Developments
15.2.6. Hovair Systems, Inc.
15.2.6.1. Company Overview
15.2.6.2. Product Portfolio
15.2.6.3. Financial Information (Subject to Data Availability)
15.2.6.4. Business Strategies / Recent Developments
15.2.7. IBS Precision Engineering
15.2.7.1. Company Overview
15.2.7.2. Product Portfolio
15.2.7.3. Financial Information (Subject to Data Availability)
15.2.7.4. Business Strategies / Recent Developments
15.2.8. Leuven Air Bearings NV
15.2.8.1. Company Overview
15.2.8.2. Product Portfolio
15.2.8.3. Financial Information (Subject to Data Availability)
15.2.8.4. Business Strategies / Recent Developments
15.2.9. Mohawk Innovative Technology, Inc.
15.2.9.1. Company Overview
15.2.9.2. Product Portfolio
15.2.9.3. Financial Information (Subject to Data Availability)
15.2.9.4. Business Strategies / Recent Developments
15.2.10. OAV Air Bearings
15.2.10.1. Company Overview
15.2.10.2. Product Portfolio
15.2.10.3. Financial Information (Subject to Data Availability)
15.2.10.4. Business Strategies / Recent Developments
15.2.11. PI Nelson Air Corp
15.2.11.1. Company Overview
15.2.11.2. Product Portfolio
15.2.11.3. Financial Information (Subject to Data Availability)
15.2.11.4. Business Strategies / Recent Developments
15.2.12. R&D Dynamics Corporation
15.2.12.1. Company Overview
15.2.12.2. Product Portfolio
15.2.12.3. Financial Information (Subject to Data Availability)
15.2.12.4. Business Strategies / Recent Developments
15.2.13. Seagull Solutions inc.
15.2.13.1. Company Overview
15.2.13.2. Product Portfolio
15.2.13.3. Financial Information (Subject to Data Availability)
15.2.13.4. Business Strategies / Recent Developments
15.2.14. SKF
15.2.14.1. Company Overview
15.2.14.2. Product Portfolio
15.2.14.3. Financial Information (Subject to Data Availability)
15.2.14.4. Business Strategies / Recent Developments
15.2.15. Specialty Components Inc.
15.2.15.1. Company Overview
15.2.15.2. Product Portfolio
15.2.15.3. Financial Information (Subject to Data Availability)
15.2.15.4. Business Strategies / Recent Developments

Section 16. Key Takeaways

Buy this Full Research Report@ https://www.visionresearchreports.com/report/cart/34926