Gå direkt till innehåll

Kategorier: vallmaskiner

  • Höjd ribba för prestanda och hållbarhet: CLAAS presenterar nya ROLLANT 630 RC UNIWRAP

    Höjd ribba för prestanda och hållbarhet: CLAAS presenterar nya ROLLANT 630 RC UNIWRAP

    CLAAS utökar produktserien för kombinations-balpressar
    Harsewinkel/Metz-Woippy, 27 juni 2024. ROLLANT UNIWRAP har, i årtionden, förenklat vardagen för lantbrukare världen över, tack vare dess tillförlitlighet och hållbarhet. CLAAS presenterar den nya ROLLANT 630 RC UNIWRAP, som markerar en vidareutveckling av den beprövade serien för att komplettera det nuvarande produktsortimentet. Huvudfokus

  • New professional equipment features for JAGUAR 900 forage harvesters from CLAAS

    New professional equipment features for JAGUAR 900 forage harvesters from CLAAS

    Harsewinkel/Bad Saulgau, 7th September 2021. The forage harvesters of the JAGUAR 900 model series now benefit from a raft of new features associated with the feeder unit, the corncracker, and the silage additive dosing system. Further new developments are available for the ORBIS and PICK UP front attachments.

  • Per Rudengren, driftschef på Stenhammars Gods

    CLAAS levererat till kungens lantbruk

    ​Kung Carl Gustavs lantbruk Stenhammars Gods i Södermanland har köpt en ny CLAAS traktor och slåttermaskin. Maskinerna levererades till kungens lantbruk av Swedish Agro Machinery i juni. Traktorn är en AXION 870 CMATIC och slåtterkrossen en DISCO 3600 FC MOVE i fronten och DISCO 9200 C AUTOSWATHER där bak.

  • The introduction of exhaust emission stage V for the TORION mid-range models upwards means they now offer more power, more comfort and more intelligence.

    CLAAS: Stage V update brings performance enhancement and more comfort

    CLAAS will introduce exhaust emission stage V in July 2020 across three models in the mid-range TORION series. In light of this, key areas of the drive, lifting kinematics and cab will be revised. In addition, a six-cylinder power unit in the TORION 1511 now provides significantly more power.

  • When mowing slopes, it is possible to angle the mower bed up to 45° upwards and up to 20° downwards.

    CLAAS MAX CUT mower bed now available from 2.2m working width

    ​CLAAS is introducing new rear side-mounted mowers to replace its DISCO Inline and DISCO 50 series from the summer of 2020. The nine brand-new models not only include numerous useful features but also the proven MAX CUT mower bed and cover working widths from 2.2 to 3.4 m.

  • Närheten till kunderna med service, försäljning och reservdelar är vårt fokus.

    Swedish Agro Machinery fortsätter sin tillväxtresa och växlar upp ytterligare

    Swedish Agro Machinery AB har sedan starten för fyra år sedan haft en kraftig tillväxt och räknar i år med att tillsammans med dotterbolaget Östra Sönnarslövs Traktorservice AB omsätta närmare en miljard kronor. Under de fyra åren har tillväxten skett både geografiskt och genom ett utökat produktutbud. Nu söker man 3 nya säljare.

  • The hydraulically swivelling lower links ensure that the front mower unit can be shifted laterally by 30 cm to the left and right.

    News from CLAAS - Swivelling lower links for negotiating bends during mowing

    CLAAS and Hans Sauter GmbH have jointly developed a hydraulically swivelling front lower links system for use with mounted front and rear mower combinations. This reduces or even completely eliminates strip of grass being left when negotiating bends and mowing on slopes. This makes a significant contribution to higher forage quality, especially on tractors with wider tyres and a wide track width.