Skip to content
Fibrelite engineered bespoke retrofit GRP trench covers for the Hinkley Point (A) Nuclear Power Station, currently under decommissioning
Fibrelite engineered bespoke retrofit GRP trench covers for the Hinkley Point (A) Nuclear Power Station, currently under decommissioning

Press release -

Magnox Leads The Way In Manual Handling In The Nuclear Decommissioning Industry By Specifying Fibrelite

Fibrelite were approached by Magnox to provide numerous replacement manhole and trench covers to replace the existing degrading concrete and cast-iron covers. This works had to be co-ordinated and delivered within a tight schedule to provide a safe, efficient and consistent solution within the decommissioning work being undertaken at Hinkley Point A.

Key features of Fibrelite covers for this project:

  • Best strength to weight ratio available in the market today
  • Fully customisable options available as standard
  • Reliable – cover load ratings consistent with the requirements of EN 124
  • Easy interface – no specialist personnel or machinery required for maintenance/operation post-install

Problem

The client established that the pre-existing concrete covering arrangement would be very troublesome long term and had experienced a number of failures across a number of locations/sites causing confidence in these access covers to be questioned. Typically, the existing covers are located in pedestrian and vehicular traffic areas. This lack of confidence had led to large areas being barriered off and exclusion zones put in place. The existing cover material poses a number of difficulties:

  • Extreme weight – particularly in the nuclear industry, ease of access for services is imperative. Heavy concrete covers impair this
  • Manual handling – the customer was concerned about the risk of injury due to the manual handling of these heavy loads
  • Deteriorating performance – the covers were exhibiting high levels of corrosion and structural degradation leading to concerns of fit for purposes application

The size and complexity of this project deemed that the design would need to be very flexible.

Solution

Fibrelite proved to be an ideal choice for the client’s requirements, meeting their demands in a number of areas:

  • Lightweight covering arrangement suitable for two-person lift
  • Health & safety concerns surrounding manual handling eliminated
  • Chemically inert - safe & functional. Uniform ‘anti-slip’ tread pattern supplied as standard, will last for years to come without degradation

Fibrelite provided all fully customisable options to the customer which were essential and unique to the customer. For this project Fibrelite provided differing depths, load ratings and covers with locking mechanisms in some instances.

Results

Post-install – the customer was pleased with the finish provided and advised they would continue to specify Fibrelite access covers for future projects. Benefits at a glance:

  • Chemically inert covers will last for years to come
  • Access to trench services simplified using the Fibrelite FL7 ergonomic lifting handles (allowing safe lifting from waist height)
  • All bespoke product features adhered to allowing minimal disruption to site
  • ‘Fit and forget’ solution - modern, safe & secure
  • Trench and manhole covers that have technical data underpinning load capacity and test results
  • Significant site hazard reduction 

For more case studies, visit the Fibrelite website

Related links

Topics

Categories


About Fibrelite

Fibrelite is a global manufacturer of highly-engineered glass-reinforced plastic (GRP) composite access covers capable of taking up to 90-tonne loads whilst still being light enough to be lifted by hand and is renowned for its high-quality technical support and service.

Initially developed almost 40 years ago and now the industry standard for petrol station forecourts, Fibrelite covers are increasingly specified for both new and retrofit work in a variety of industries in more than 80 countries around the world. To find out more, please visit Fibrelite’s website

In Germany, Fibrelite is represented by their distributor KHK, based in Eggenstein

For more information, please contact Aaron McConkey (aaron@fibrelite.com +44 (0) 1756 794 963)

Fibrelite; Snaygill Industrial Estate; Keighley Road; Skipton; North Yorkshire BD23 2QR

Contacts

  • Magnox Leads The Way In Manual Handling In The Nuclear Decommissioning Industry By Specifying Fibrelite
    Magnox Leads The Way In Manual Handling In The Nuclear Decommissioning Industry By Specifying Fibrelite
    License:
    All rights reserved
    File format:
    .pdf
  • Magnox Leads The Way In Manual Handling In The Nuclear Decommissioning Industry By Specifying Fibrelite
    License:
    All rights reserved
    File format:
    .docx

Related content

  • Remplacement des couvertures de tranchées par des tampons en fibre sur mesure conçus et réalisés par Fibrelite sur le site de Hinkley Point (A) centrale nucléaire, en cours de démantèlement

    Magnox ouvre la voie de la manutention manuelle des couvertures de caniveaux dans l'industrie du nucléaire en spécifiant Fibrelite

    Magnox a contacté Fibrelite pour fournir de nombreuses couvertures de trou d’homme et de tranchée pour remplacer les tampons dégradés en béton et en fonte existants. Ces travaux devaient être coordonnés et livrés dans un calendrier serré afin de fournir une solution sûre, efficace et cohérente dans le cadre des travaux de démantèlement entrepris à Hinkley Point A.

  • Heavy Trench Covers Are History

    Heavy Trench Covers Are History

    Once in a while, a product will come along whose performance will drive a change in standards across entire industries. Like stainless steel. Or concrete. Or a trench cover which is(typically) 65% lighter than the cast iron traditionally used, eliminating the need for costly specialised lifting equipment and the accompanying health and safety hazards.