In December, AMAC Aerospace performed pre-purchase inspections (PPIs) on a Gulfstream G650 and a G550 at the hangars in Basel, Switzerland. Both PPIs were level 1. The G550 also underwent engine and auxiliary power unit (APU) borescope inspections.
A Dassault Falcon 2000 belonging to a long term customer arrived at AMAC Aerospace Turkey’s hangar in Istanbul for a 12-month and 400-flight-hour inspection, including several servicing and cleaning tasks.
At the end of November, AMAC Aerospace Basel, Switzerland, successfully completed maintenance checks on 2x Boeing B737 aircraft. One aircraft underwent a 1A inspection, while the other underwent A, B1, B2, B3, and B4 inspections.
AMAC Aerospace Turkey’s Istanbul team received a request from Dassault Falcon via the ASC network when a new customer’s Dassault Falcon 900EX EASy aircraft experienced an AOG situation in Erbil, Iraq. The starter generator did not engage during engine start, so AMAC Aerospace immediately sent the goTEAM to support the aircraft that same evening.
A Bombardier Global Express from a new customer arrived at AMAC Aerospace’s facility in Basel, Switzerland, for maintenance inspections. The aircraft underwent 250-, 500-, 1500-, and 5000-flight-hour inspections, as well as a 15-month inspection. In addition, a floor beam change was conducted.
AMAC Aerospace Turkey Istanbul is pleased to have supported 2x Dassault Falcon 900EX EASy customers in Ankara, Turkey, at the end of November.
In late November, 2x operators of Bombardier Challenger 605 aircraft contacted AMAC Aerospace’s team in Basel, Switzerland, for drop-in AOG support. The first aircraft belongs to a new customer who came for a navigation light change. The second aircraft belongs to a long-term customer who came for a cockpit side window replacement.
At the end of November, AMAC Aerospace’s Boeing team redelivered a Boeing B737 to a long term customer after successfully completing a C1 and C2 check, as well as interior modifications and refurbishment. The bulkhead was refurbished and the non-textile flooring (NTF) was replaced.
In late November, AMAC Aerospace Turkey welcomed 2x Dassault Falcon 8Xs to the hangar in Istanbul for line maintenance. The electronic databases of the aircraft were updated to the latest cycles as necessary.
AMAC Aerospace is pleased to have completed maintenance, modifications and refurbishments on an Airbus A340. The head of state aircraft underwent a 4-year check at the hangar in Basel, Switzerland.
AMAC Aerospace Turkey, Istanbul, has completed a 12-months and 800-flight hour inspection of a new customer’s Dassault Falcon 2000EX EASy aircraft. In parallel, AMAC Aerospace’s experienced team removed the current engine of the aircraft, which was a leasing unit, and installed the original back.
AMAC Aerospace welcomed back a long-term customer's Airbus A330 from Asia to its hangars in Basel, Switzerland. AMAC Aerospace’s Airbus team performed A1, A2 and C1 checks on the aircraft as well as out-of-phase work.
