At the beginning of December, AMAC Aerospace completed maintenance on a Boeing B737 from a long term commercial customer. The aircraft underwent a 12-year inspection at AMAC Aerospace’s hangar in Bodrum, Turkey.
AMAC Aerospace Turkey, Istanbul, is pleased to have redelivered a Dassault Falcon 2000 to a long term customer. The crew of the privately owned aircraft reported a landing gear lock failure and the aircraft was jacked up for troubleshooting. AMAC Aerospace’s team found that one of the main landing gear door actuators was inoperative.
A new part was ordered and replaced on an AOG basis. During
In late October, a customer contacted JCB Aero for AOG support for their Airbus A320. JCB Aero accepted the request and welcomed the aircraft to their hangar in Auch, France. The aircraft had a tight flight schedule but JCB Aero succeeded to complete the maintenance input in only one day.
A Dassault Falcon 900EX EASy arrived at AMAC Aerospace’s Istanbul hangar after the crew reported a digital data failure with the engine. AMAC Aerospace’s team performed troubleshooting and correctly tightened the connectors. Afterwards, the system continued to function properly.
At the end of October, AMAC Aerospace completed maintenance on an Airbus A320 and Airbus A319 aircraft at the hangars in Basel, Switzerland. The Airbus A320 belongs to one of AMAC Aerospace’s long term customers and came in for a 6-month inspection. The Airbus A319 belongs to another long term customer and came in for an A1 and 3A check.
AMAC Aerospace is pleased to have successfully completed a 12-year inspection and redelivery of an Airbus A320-200 at the hangars in Bodrum, Turkey. This aircraft is the sixth successfully completed redelivery under this ongoing project.
JCB Aero is pleased to have completed maintenance on an Airbus A320 at the hangar in Auch, France. The aircraft came for an A check. During the inspection, corrosion was found and rectified by JCB Aero’s team. The cabin interior was cleaned and the paint and leather were touched up.
At the beginning of October, AMAC Aerospace redelivered three Dassault Falcon 7X aircraft after maintenance at the hangar in Istanbul, Turkey.
Following initial certification in 2019 and a successful renewal in 2022, AMAC Aerospace is pleased to announce that the Basel facility has once again been awarded the ISO 45001 certification without any findings.
AMAC Aerospace is pleased to have redelivered a Boeing B747 to a long term customer. The Head of State aircraft underwent a 6A inspection and had Starlink installed for internet connectivity.
AMAC Aerospace is pleased to have performed engine mount inspections on a Dassault Falcon 2000 and 2000EX EASy aircraft at the hangar in Istanbul, Turkey. The inspections were performed due to hard time component requirements.
In mid-October, AMAC Aerospace completed maintenance on an Airbus A340-600 at the hangar in Basel, Switzerland. AMAC Aerospace’s experienced Airbus team performed 1A, 2A, 3A, 6A and 1C inspections of the aircraft.
