Skip to content
ロボットコントローラRCX3シリーズ用サポートソフトウェアを新発売 〜ロボットシステムの立ち上げ時間を大幅削減する新機能を搭載〜

ドキュメント -

ロボットコントローラRCX3シリーズ用サポートソフトウェアを新発売 〜ロボットシステムの立ち上げ時間を大幅削減する新機能を搭載〜

go to media item
ライセンス:
Media Use
The content may be downloaded by journalists, bloggers, columnists, creators of public opinion, etc. It can be used and shared in different media channels to convey, narrate, and comment on your press releases, posts, or information, provided that the content is unmodified. The author or creator shall be attributed to the extent and in the manner required by good practice (this means, for example, that photographers should be attributed).
ファイル形式:
.pdf
ダウンロード

関連記事

  • RCX3シリーズコントローラ用サポートソフト「RCX-Studio 2020」(操作画面イメージ)

    ロボットコントローラRCX3シリーズ用サポートソフトウェアを新発売 〜ロボットシステムの立ち上げ時間を大幅削減する新機能を搭載〜

     ヤマハ発動機株式会社は、ロボットコントローラ「RCX3シリーズ」用のサポートソフトウェア「RCX-Studio 2020」を2020年5月14日に発売します。本製品は従来製品「RCX-Studio Pro」に、3Dシミュレータ機能やプログラムテンプレート(プログラム雛形自動生成機能)などの新機能を搭載し、よりユーザビリティを向上させたソフトウェアです。
     実際のロボットが無い状態でも、パソコンの画面上で設備のレイアウト検討やティーチング、プログラム作成、デバッグなどを行うことができます。これにより、ロボットシステムの早期立ち上げや作業者の負荷軽減に大きく貢献します。
     

     
    ■RCX-Studio 2020の主な機能
    1)3Dシミュレータ機能
     ロボットと周辺機器を3Dで表示しパソコン上でロボットの動作をシ