Skip to content
Radon is everywhere, including workplaces.
Radon is everywhere, including workplaces.

Blog post -

Guide to radon monitoring in the workplace

Under the EU Radiation Protection Directive, 2013/59/Euratom, which entered into force in February 2018, employers must determine the radon concentrations in the workplace and take appropriate measures to address radon levels above the national limit for radon. With the introduction of the new Directive, questions often arise as to how radon monitoring in the workplace should be handled.

How do we measure radon in workplaces and what should we be considering?
It is basically easy to measure radon. You order radon detectors, deploy them, record data, collect the detectors and send them to the radon laboratory, which will return a report by e-mail or online. However, there are several aspects to consider, such as how many radon detectors are needed for a reliable measurement. Another question is how the work can be done as efficiently as possible. As the biggest cost of radon measurement is the time it takes to deploy the detectors, record the data, and then retrieve them again, it is vital to ensure efficiency and safety at all stages of the process.

Requirements for radon monitoring in a workplace
To make efficient use of time and arrive at a correct measurement, the person monitoring a workplace should make the following demands of the laboratory where the radon detectors were bought. This applies whether you do the job yourself or use an external consultant. Measurements should be taken with radon detectors from an accredited radon laboratory.

Ensure that:

  • the laboratory is accredited according to ISO 17025 for measuring radon in indoor air
  • the delivery time for detectors is within 2-3 days of ordering
  • the delivery time for electronic analysis reports is within one (1) week of the detectors reaching the laboratory
  • the laboratory has a web application which allows measurement details to be entered and results to be downloaded, and:
  • measurements to be filtered on e.g. address, property name, order code etc.
  • consolidated reports to be downloaded in PDF format
  • can be used on a tablet or other mobile device in the field.

It is also important to make the radon measurements known to your own staff. Information material on radon and the planned measurements should therefore be distributed before monitoring starts. It is also important to inform the cleaning staff if the service is outsourced. The radon detectors need to be placed securely so they cannot be moved or otherwise interfered with during monitoring (cable ties could be used).

How many radon detectors are needed to monitor radon in the workplace?
For radon measurement in the workplace, Radonova recommends following guidelines from IRMA (the International Radon Measurement Association). You will then meet your national requirements as well. The advantage of IRMA’s guidelines is that their recommended measurement procedure helps to save time.

The following locations must be included when measuring radon:

  • Rooms and locations regularly used for more than four hours per day
  • All underground/basement locations or other locations used by anyone for more than 50 hours per year where there is a risk of radon leakage
  • Any relevant locations/rooms at basement and ground floor level. In larger spaces, deploy at least one detector per 150 m2.
  • On higher floors: At least two detectors, and at least one per 250 m2.

What happens if you are over the reference value?
If it turns out that you are over the reference value, you should start by measuring the radon concentration during working hours (a shorter period). You could do this with Radonova’s Duotrak radon detector, for example. Note: Because work premises are usually ventilated more during working hours, the radon level could be lower at this time.

If the workplace is still over the reference value, you must take steps to reduce the radon level. This is normally done by controlling the ventilation. In these cases, however, we recommend contacting a radon consultant who can investigate where the radon is coming from and suggest appropriate action.

For more information about radon please visit www.radonova.org.

Related links

Topics

Categories

Contacts

Related content

  • Radonova is the laboratory of choice for numerous government radon surveys, as well as other public and private sector large scale measurement contracts around the world.

    Bill Rounds Promoted to President at Radonova Group

    Bill Rounds has been promoted from Vice President, Americas and Australia, to President within the parent Radonova Group AB, a global enterprise with offices and partnerships in numerous countries across the world.

  • Karl Nilsson, CEO Radonova Laboratories

    Global study confirms the harmful effects of radon

    A study based on data from 66 countries and presented in Environmental Health Studies (EHP) confirms that there is a clear link between exposure to radon and the risk of lung cancer. Updated data from 2012 show that around 226,000 people died that year from radon-related lung cancer. That means that about three per cent of all those who die from some form of cancer do so because of radon.

  • Radonova’s new web application has a completely new and intuitive user interface and gives users secure access to reports, measurement jobs and other data, all updated in real time.

    Radon measurement season in full swing

    You can actually measure radon all year round, but if you want an annual average for radon levels in your home or workplace, you have to measure them over the course of at least two months during the winter when heating systems are on. In Sweden this is between 1 October and 30 April. In practice, this means you have to start measuring radon levels by the end of February.

  • SPIRIT makes radon measurement in schools easier for SoVent Group's radon consultants

    SPIRIT makes radon measurement in schools easier for SoVent Group's radon consultants

    Since the radon logger SPIRIT was launched just over a year ago, several of Sweden's radon consultants have started using the instrument when measuring both in schools and at other workplaces. Among these is Elias Flink at SoVent Group. We have met Elias, who tells us how SPIRIT makes a difference and simplifies the work with radon measurement in a school environment.

  • Johan Olsson of Radonova Laboratories is a specialist in workplace monitoring. He describes his view of efforts to monitor radon in the workplace.

    “It’s time the new Radiation Protection Act for workplaces is taken seriously”

    Sweden’s new Radiation Protection Act came into force on 1 June 2018. Now the country’s employers have to be aware of the radon levels in our workplaces. Employers also have to take action that may reasonably be required to tackle radon levels over the hygienic limit value of 200 Bq/m³. Johan Olsson of Radonova Laboratories describes his view of efforts to monitor radon in the workplace.

  • Radonova takes leading role in Polish radon measurement project.

    Radon concern and awareness grows in Poland

    Like many of its European counterparts, in the summer of 2020 Poland implemented new regulation in relation to radon in the form of the 2013/59/EURATOM directive. In line with other European countries, official measurements will now have to last for at least one month between October and March with a reference level set at 300 Bq/m3.
    Polish government recognizes radon as a significant public h

  • Duotrak

    A Guide to Understanding Radon Dosimetry

    This is a brief introduction to radon dosimetry which describes what it is and when and how to use it. It has been put together with the help of Radonova's radon laboratory experts. Feel free to contact them if you have any questions or want more detailed information.
    What is the difference between conventional radon measurement and using a radon dosimeter?

    Normally, when measuring for r

  • Radonova has highlighted common mistakes when measuring radon in workplaces

    Five common mistakes when measuring radon in workplaces

    The cost of radon measurement in the workplace usually lies in the amount of time it takes for deployment and collection of the radon detectors. Therefore, like in many other situations, it pays to do it correctly from the start. If not, hiring radon consultants for remeasurements can be costly.

  • How to measure for radon in workplaces

    Frequently asked questions about radon measurement in workplaces

    We thought it would be helpful to answer some of the most common questions asked about radon measurement in workplaces.
    Radon and health risks
    Radon is a decomposition product from uranium found in our bedrock. Because it is gas, it can leak into buildings through the ground. Depending on the building's construction and ventilation system design, elevated levels of radon can be created in in

  • Workplace measurement: How to avoid unnecessary remeasurements

    Workplace measurement: How to avoid unnecessary remeasurements

    We are at the beginning of the radon measurement season in most European countries, so we thought it would be helpful to provide some tips on how to reduce the risk of remeasurement. Bear in mind that the main cost involving radon measurement relates to the time it takes to place and collect radon detectors. Also take into account the cost of radon consultants in any remeasurement process. In the

  • The ongoing pandemic has changed the way in which we measure for radon worldwide.

    How has Covid-19 affected radon measurements?

    The ongoing pandemic has changed the way in which we measure for radon worldwide. Here, the CEO of the world's largest radon laboratory Radonova, comments on the changes in the industry.
    More important than ever to protect your lungs

    In terms of public perceptions, Covid-19 has put public health issues at the forefront of everybody’s mind, and in regard to our radon laboratory interest i