AMAC Aerospace Turkey: Maintenance Accomplished on Dassault Falcon 8X and 7X Aircraft
At the beginning of November, AMAC Aerospace Turkey, Istanbul, completed maintenance on several Dassault Falcon 8X and 7X aircraft.
-
-
JCB Aero: Accomplished 6-Month Inspection on Airbus A318
In mid-November, JCB Aero completed maintenance on an Airbus A318. JCB Aero’s skilled technicians performed a 6-month inspection and due maintenance tasks of the aircraft.
-
AMAC Aerospace Turkey: 12-Year Inspection Completed on Boeing B737NG Ahead of Schedule
At the beginning of December, AMAC Aerospace completed maintenance on a Boeing B737 from a long term commercial customer. The aircraft underwent a 12-year inspection at AMAC Aerospace’s hangar in Bodrum, Turkey.
-
AMAC Aerospace Turkey: Landing Gear Maintenance on Dassault Falcon 2000
AMAC Aerospace Turkey, Istanbul, is pleased to have redelivered a Dassault Falcon 2000 to a long term customer. The crew of the privately owned aircraft reported a landing gear lock failure and the aircraft was jacked up for troubleshooting. AMAC Aerospace’s team found that one of the main landing gear door actuators was inoperative.
A new part was ordered and replaced on an AOG basis. During -
JCB Aero: Successfully Completed AOG Support on Airbus A320
In late October, a customer contacted JCB Aero for AOG support for their Airbus A320. JCB Aero accepted the request and welcomed the aircraft to their hangar in Auch, France. The aircraft had a tight flight schedule but JCB Aero succeeded to complete the maintenance input in only one day.
-
AMAC Aerospace Turkey: Line Maintenance Performed on Dassault Falcon 900EX EASy
A Dassault Falcon 900EX EASy arrived at AMAC Aerospace’s Istanbul hangar after the crew reported a digital data failure with the engine. AMAC Aerospace’s team performed troubleshooting and correctly tightened the connectors. Afterwards, the system continued to function properly.
-
Maintenance Inspections Accomplished on Airbus A320 and A319
At the end of October, AMAC Aerospace completed maintenance on an Airbus A320 and Airbus A319 aircraft at the hangars in Basel, Switzerland. The Airbus A320 belongs to one of AMAC Aerospace’s long term customers and came in for a 6-month inspection. The Airbus A319 belongs to another long term customer and came in for an A1 and 3A check.
-
AMAC Aerospace Turkey: 12-Year Inspection and Redelivery of Airbus A320-200
AMAC Aerospace is pleased to have successfully completed a 12-year inspection and redelivery of an Airbus A320-200 at the hangars in Bodrum, Turkey. This aircraft is the sixth successfully completed redelivery under this ongoing project.
-
JCB Aero: A-Check Completed on Airbus A320
JCB Aero is pleased to have completed maintenance on an Airbus A320 at the hangar in Auch, France. The aircraft came for an A check. During the inspection, corrosion was found and rectified by JCB Aero’s team. The cabin interior was cleaned and the paint and leather were touched up.
-
AMAC Aerospace Turkey: Redelivered 3x Dassault Falcon 7X
At the beginning of October, AMAC Aerospace redelivered three Dassault Falcon 7X aircraft after maintenance at the hangar in Istanbul, Turkey.
-
AMAC Aerospace Successfully Passed ISO 45001 Renewal Audit
Following initial certification in 2019 and a successful renewal in 2022, AMAC Aerospace is pleased to announce that the Basel facility has once again been awarded the ISO 45001 certification without any findings.
-
Starlink Installation and Maintenance Inspection on Boeing B747
AMAC Aerospace is pleased to have redelivered a Boeing B747 to a long term customer. The Head of State aircraft underwent a 6A inspection and had Starlink installed for internet connectivity.
Show more
Loading...