AMAC Aerospace Turkey: Line Maintenance on Dassault Falcon 7X & 8X
AMAC Aerospace is pleased to have redelivered a Dassault Falcon 7X and 8X after line maintenance at the hangar in Istanbul, Turkey.
AMAC Aerospace is pleased to have redelivered a Dassault Falcon 7X and 8X after line maintenance at the hangar in Istanbul, Turkey.
At the end of December, AMAC Aerospace Basel, Switzerland, performed maintenance on 3x Gulfstream G550 aircraft.
A Boeing BBJ 737 from a long term customer arrived at AMAC Aerospace’s facility in Basel, Switzerland, for maintenance. The aircraft underwent a 1-month inspection and defect rectification. AMAC Aerospace’s team also replaced the aircraft’s tires and grey water valve.
A Dassault Falcon 2000EX EASy underwent defect rectification at AMAC Aerospace’s hangar in Istanbul, Turkey. The operator had reported a pressure relief valve (PRV) CAS message, so AMAC Aerospace’s team performed a detailed inspection and found that a faulty printed circuit board (PCB) was causing the issue. They replaced the part and performed an engine run-up to check valve operations.
In mid-November, AMAC Aerospace Basel, Switzerland, redelivered 2x Bombardier Global aircraft – a Global 5000 and a Global 5500 – after successfully completing maintenance.
At the beginning of December, AMAC Aerospace Turkey, Istanbul, completed maintenance on a Dassault Falcon 8X and 7X aircraft.
AMAC Aerospace is pleased to have completed maintenance on both a Bombardier Global 7500 and a Challenger 300.
In late November, AMAC Aerospace Turkey performed several defect rectifications at the Istanbul hangar. A Dassault Falcon 2000EX EASy of a long term customer came to replace the VDR module. While the aircraft was there, AMAC Aerospace’s team found that one of the tires on the main wheel assembly was worn down, so they replaced it with a spare.
AMAC Aerospace have successfully completed a pre-purchase inspection (PPI) of a Bombardier Global 6000 at the hangar in Basel, Switzerland. The PPI was on Level 1.
AMAC Aerospace Turkey Istanbul welcomed 2x Dassault Falcon 2000 series aircraft for line maintenance at the end of November.
In December, AMAC Aerospace performed pre-purchase inspections (PPIs) on a Gulfstream G650 and a G550 at the hangars in Basel, Switzerland. Both PPIs were level 1. The G550 also underwent engine and auxiliary power unit (APU) borescope inspections.
A Dassault Falcon 2000 belonging to a long term customer arrived at AMAC Aerospace Turkey’s hangar in Istanbul for a 12-month and 400-flight-hour inspection, including several servicing and cleaning tasks.