AMAC Aerospace Turkey: Accomplished Maintenance on 3x Dassault Falcon 2000EX EASy Aircraft

In mid-October, AMAC Aerospace Turkey, Istanbul, welcomed 3x Dassault Falcon 2000EX EASy aircraft from a long term customer. The first aircraft underwent several out-of-phase tasks due to requirements for airframe and components. While performing these tasks, a T1 temperature sensor failure was observed, as well as a worn-to-the-limit brake unit. Both parts were replaced with serviceable units.

The second Dassault Falcon 2000EX EASy arrived after the customer reported that the VHF (very high frequency) system was not working properly. AMAC Aerospace’s team therefore replaced the NIM (network interface module) with a serviceable unit. They performed VHF transmission checks and all faults were cleared.

The third aircraft had an AGM (advanced graphics module) failure reported in the aircraft log, so AMAC Aerospace’s team troubleshot the issue. They found that the subject module was faulty and replaced it with a serviceable unit.