Skip to content
The right radon sensor can reduce the cost of ventilation by up to 50 percent

Blog post -

The right radon sensor can reduce the cost of ventilation by up to 50 percent

With the radon sensor SPIRIT it is easy to monitor the radon levels in schools and other premises. By using a modern radon sensor, you can also ensure that the ventilation is not switched on unnecessarily. This enables facilities to save energy and accompanying costs.

Schools and workplaces with radon problems often use ventilation to reduce radon levels to acceptable levels. Historically, radon instruments with sensitivity that is too low have been used to set a reliable time-controlled ventilation.

The ventilation is often on unnecessarily

“In practice, the ventilation in properties is often left on for far too long without it being necessary. In extreme cases, we have seen that the ventilation runs continuously throughout the day. Even though this is one of the rare cases, in many situations it is possible to get more energy-efficient ventilation by using the functionality in SPIRIT,” says Karl Nilsson, CEO at Radonova.

Since SPIRIT has an internal spectral resolution of 10 minutes, it is possible to extract more precise and accurate radon data when students, teachers and employees are in the premises in question. The radon levels can be easily viewed through Radonova's web portal, where you can also view advanced graphs and create your own dashboards. APIs can be used if you prefer to see radon data in your own property system. It is also possible to connect to the ventilation system for maximum optimization based on the radon level, which provides a long-term and cost-effective solution.

“By using Radonova's uniquely highly sensitive radon sensor and measuring the radon level in real time, it is possible to positively influence both our common environment and the work environment, while at the same time lowering the costs for ventilation in the property,” concludes Karl Nilsson.

Contact us for more information on the product

Topics

Categories

Contacts

Related content

  • SPIRIT makes radon measurement in schools easier for SoVent Group's radon consultants

    SPIRIT makes radon measurement in schools easier for SoVent Group's radon consultants

    Since the radon logger SPIRIT was launched just over a year ago, several of Sweden's radon consultants have started using the instrument when measuring both in schools and at other workplaces. Among these is Elias Flink at SoVent Group. We have met Elias, who tells us how SPIRIT makes a difference and simplifies the work with radon measurement in a school environment.

  • Radonova has highlighted common mistakes when measuring radon in workplaces

    Five common mistakes when measuring radon in workplaces

    The cost of radon measurement in the workplace usually lies in the amount of time it takes for deployment and collection of the radon detectors. Therefore, like in many other situations, it pays to do it correctly from the start. If not, hiring radon consultants for remeasurements can be costly.

  • Optimizing ventilation in workplaces and schools

    Choose the right radon sensor to optimize ventilation in workplaces and schools

    In this article, we explain why it is important to choose the right radon sensor if you are looking to optimize ventilation in workplaces and schools. In properties with ventilation, radon levels can often vary and this is often dependent on whether the ventilation is running or not. Normally, radon levels are significantly lower when the ventilation is switched on. Depending on the design and eff