Skip to content

Categories: workplace

  • Maroua Elazizi

    Radonova creates opportunities for young talent

    At Radonova, the door is always open to young and ambitious employees who want to grow in their professional role. The latest to join the team is Maroua Elazizi, who started her internship at Radonova's French operation in September. Maroua is studying for a Bachelor's degree in Digital Marketing and Customer Relations at Excelia in La Rochelle.

  • Radonova at the IEA symposium in Orlando

    Radonova at the IEA symposium in Orlando

    In September, Radonova participated in the IEA (Indoor Environments Association, formerly AARST) symposium in Orlando. The event is the industry's leading forum for exchanging knowledge about indoor environments and the health risks posed by radon and vapor intrusion. The symposium presented new research and technologies to address these problems and improve air quality in buildings.

  • The measuring season begins – now is the time to find out the radon level in homes and workplaces

    The measuring season begins – now is the time to find out the radon level in homes and workplaces

    Radon can be measured year-round, but if you want a good estimation of an annual average value for the radon level in your home or workplace, then you should measure during at least three of the heating season months (winter months). This enables employers, schools, property owners, condominium associations and homeowners to get a full overview of the radon within their homes and buildings.

  • What is the easiest way to measure radon?

    What is the easiest way to measure radon?

    Nowadays there are radon regulations all over the world that determine the parameter called radon concentration. Of all the radon measurement techniques, radon detectors based on CR39 plastic chips are the most widely used radon detection techniques throughout the world.

  • Radonova has highlighted common mistakes when measuring radon in workplaces

    Five common mistakes when measuring radon in workplaces

    The cost of radon measurement in the workplace usually lies in the amount of time it takes for deployment and collection of the radon detectors. Therefore, like in many other situations, it pays to do it correctly from the start. If not, hiring radon consultants for remeasurements can be costly.

  • A follow-up measurement is carried out over seven days with a calibrated radon logger that has high sensitivity

    Requirement for follow-up radon measurement during working hours before mitigation

    Since the introduction of the 2013/59/Euratom directive, many countries in Europe have started strengthening their national radon regulation, specifically for workplaces and public buildings. For example, introducing lower reference and action levels as well as protocols to ensure good practice when it comes to measuring radon. In this regard, Sweden, with its long tradition of radon measurement,

  • Optimizing ventilation in workplaces and schools

    Choose the right radon sensor to optimize ventilation in workplaces and schools

    In this article, we explain why it is important to choose the right radon sensor if you are looking to optimize ventilation in workplaces and schools. In properties with ventilation, radon levels can often vary and this is often dependent on whether the ventilation is running or not. Normally, radon levels are significantly lower when the ventilation is switched on. Depending on the design and eff

  • Record breaking month for Radonova’s laboratory - 34,000 detectors analyzed in one week

    Record breaking month for Radonova’s laboratory - 34,000 detectors analyzed in one week

    May is always Radonova’s busiest period. This year, the world's leading radon laboratory broke records in the number of detectors processed. During a single week in May, Radonova handled approximately 34,000 received detectors. After a couple of years where the pandemic limited the ability to measure for radon, there is now great global demand for radon measurements.
    Oscar Wännerud, who is resp

  • Radtrak³ is now approved for use in Germany, United Kingdom and Switzerland as an official measurement solution

    Radtrak³ approved in three new European countries

    In Spring 2021, Radonova launched the latest version of its most popular global radon detector, Radtrak³. Radtrak³ is smaller than its predecessor, which simplifies both the deployment and delivery process. The smaller size and the ability to reuse plastic components also makes it more environmentally friendly.
    Radtrak³ is now approved for use in Germany, United Kingdom and Switzerland as an of

  • The European Radon Week 2021 took place this year in Fribourg, Switzerland

    European Radon Week Highlights Successful International Collaboration on Radon

    The European Radon Week 2021 took place this year in Fribourg, Switzerland. It is arguably the most important event of the year for the radon community, as it includes European Radon Association (ERA) workshops alongside a focus on Radon Outcomes On Mitigation Solutions (ROOMS).
    In Fribourg, the ERA’s workshops concentrated on international collaborations on radon. The event brings together res

  • Research measurement data of indicates that there can be unexpectedly high levels of radon, regardless of floor level

    New statistics show that all floors should be included in workplace radon measurements

    Research measurement data of over 15,000 Swedish workplaces indicates that there can be unexpectedly high levels of radon, regardless of floor level or where you specifically measure. The findings confirm the importance of measuring sufficiently and not being satisfied with a small number of measuring points. An inadequate measurement can in the long run contribute to an unnecessary health hazard.

  • Research measurement data indicates that there can be unexpectedly high levels of radon, regardless of floor level.

    New statistics show that all floors should be included in workplace radon measurements

    Research measurement data of over 15,000 Swedish workplaces indicates that there can be unexpectedly high levels of radon, regardless of floor level or where you specifically measure. The findings confirm the importance of measuring sufficiently and not being satisfied with a small number of measuring points. An inadequate measurement can in the long run contribute to an unnecessary health hazard.

  • European Radon Week takes place between 12 and 15 October, 2021

    Industry Experts Convene in Switzerland for European Radon Week

    Last year’s European Radon Week was cancelled due to the pandemic, therefore there is great anticipation for the 2021 event. The conference is being held in Fribourg, Switzerland and will take place between 12 and 15 October. The event brings together researchers, experts and industry representatives from across Europe and the rest of the world.
    The organiser is the European Radon Association (

  • Radonova attended the 15th International Workshop on the Geological Aspects of Radon Risk Mapping in Prague

    Radonova Showcases Innovative Radon Solutions at GARRM 2021

    Radonova recently attended the 15th International Workshop on the Geological Aspects of Radon Risk Mapping in Prague – GARRM 2021. The conference was the first of its kind since the start of the pandemic. On behalf of Radonova, Thomas Chauvin, Patrik Nôteberg, José-Luis Gutierrez Villanueva and Zuzanna Podgorska were at the event.
    The conference had two clear focuses – radon risk mapping and r

  • Any exposure to radon gas provides a risk, even is that exposure is reasonably low

    What are acceptable levels of radon gas exposure?

    The effects of radon gas exposure on our health are well documented and have been proven to be life threatening. In fact, Radon gas exposure is the second leading cause of lung cancer after smoking. Therefore, long-term exposure to the gas increases the probability of developing lung cancer.
    Any exposure to radon gas provides a risk, even is that exposure is reasonably low. The key message is

  • Marie and Pierre Curie were integral in discovering radioactivity, and the unit was named after them

    What type of units are used to measure radon gas?

    It seems a simple question, but in reality the answer is not so straightforward. Firstly, we need to clarify exactly what we are talking about when it comes to radon gas. There are various aspects to radon: radon gas exposure, radon gas concentration in indoor air, radon gas concentration in soil, radon in water, radon exhalation, radon doses, etc. Depending on which aspect or level we need to mea

  • There is increasing global awareness of the detrimental health risks posed by radon exposure.

    Why you should measure for radon levels

    There is increasing global awareness of the detrimental health risks posed by radon exposure. Every day the issue gains more attention. New legislations are being introduced across the world to tackle the issue, and measuring instruments are being enhanced to attain better results. But the question remains, what is the best way of measuring radon levels in the home or at the workplace.
    Radon ga

Show more