JCB Aero: Accomplished 6-Month Inspection on Airbus A318
In mid-November, JCB Aero completed maintenance on an Airbus A318. JCB Aero’s skilled technicians performed a 6-month inspection and due maintenance tasks of the aircraft.
Topics: Transport
-
-
AMAC Aerospace Turkey: 12-Year Inspection Completed on Boeing B737NG Ahead of Schedule
At the beginning of December, AMAC Aerospace completed maintenance on a Boeing B737 from a long term commercial customer. The aircraft underwent a 12-year inspection at AMAC Aerospace’s hangar in Bodrum, Turkey.
-
AMAC Aerospace Turkey: Landing Gear Maintenance on Dassault Falcon 2000
AMAC Aerospace Turkey, Istanbul, is pleased to have redelivered a Dassault Falcon 2000 to a long term customer. The crew of the privately owned aircraft reported a landing gear lock failure and the aircraft was jacked up for troubleshooting. AMAC Aerospace’s team found that one of the main landing gear door actuators was inoperative.
A new part was ordered and replaced on an AOG basis. During -
JCB Aero: Successfully Completed AOG Support on Airbus A320
In late October, a customer contacted JCB Aero for AOG support for their Airbus A320. JCB Aero accepted the request and welcomed the aircraft to their hangar in Auch, France. The aircraft had a tight flight schedule but JCB Aero succeeded to complete the maintenance input in only one day.
-
AMAC Aerospace Turkey: Line Maintenance Performed on Dassault Falcon 900EX EASy
A Dassault Falcon 900EX EASy arrived at AMAC Aerospace’s Istanbul hangar after the crew reported a digital data failure with the engine. AMAC Aerospace’s team performed troubleshooting and correctly tightened the connectors. Afterwards, the system continued to function properly.
-
Maintenance Inspections Accomplished on Airbus A320 and A319
At the end of October, AMAC Aerospace completed maintenance on an Airbus A320 and Airbus A319 aircraft at the hangars in Basel, Switzerland. The Airbus A320 belongs to one of AMAC Aerospace’s long term customers and came in for a 6-month inspection. The Airbus A319 belongs to another long term customer and came in for an A1 and 3A check.
-
AMAC Aerospace Turkey: 12-Year Inspection and Redelivery of Airbus A320-200
AMAC Aerospace is pleased to have successfully completed a 12-year inspection and redelivery of an Airbus A320-200 at the hangars in Bodrum, Turkey. This aircraft is the sixth successfully completed redelivery under this ongoing project.
-
JCB Aero: A-Check Completed on Airbus A320
JCB Aero is pleased to have completed maintenance on an Airbus A320 at the hangar in Auch, France. The aircraft came for an A check. During the inspection, corrosion was found and rectified by JCB Aero’s team. The cabin interior was cleaned and the paint and leather were touched up.
-
AMAC Aerospace Turkey: Redelivered 3x Dassault Falcon 7X
At the beginning of October, AMAC Aerospace redelivered three Dassault Falcon 7X aircraft after maintenance at the hangar in Istanbul, Turkey.
-
AMAC Aerospace Successfully Passed ISO 45001 Renewal Audit
Following initial certification in 2019 and a successful renewal in 2022, AMAC Aerospace is pleased to announce that the Basel facility has once again been awarded the ISO 45001 certification without any findings.
-
Starlink Installation and Maintenance Inspection on Boeing B747
AMAC Aerospace is pleased to have redelivered a Boeing B747 to a long term customer. The Head of State aircraft underwent a 6A inspection and had Starlink installed for internet connectivity.
-
AMAC Aerospace Turkey: Engine Mount Inspections on Dassault Falcon 2000 and 2000EX EASy
AMAC Aerospace is pleased to have performed engine mount inspections on a Dassault Falcon 2000 and 2000EX EASy aircraft at the hangar in Istanbul, Turkey. The inspections were performed due to hard time component requirements.
-
Maintenance Inspections Performed on Airbus A340-600
In mid-October, AMAC Aerospace completed maintenance on an Airbus A340-600 at the hangar in Basel, Switzerland. AMAC Aerospace’s experienced Airbus team performed 1A, 2A, 3A, 6A and 1C inspections of the aircraft.
-
AMAC Aerospace Turkey: Heavy Base Maintenance Performed on Dassault Falcon 7X
AMAC Aerospace Turkey, Istanbul, has completed heavy base maintenance on a Dassault Falcon 7X of a new European customer. The aircraft underwent a 12-month and 800-flight-hour inspection, as well as a 1B-2B letter check and several out-of-phase tasks.
-
Heavy Corrosion Rectification on Gulfstream IV
A customer from South Asia brought their Gulfstream IV to AMAC Aerospace in Basel, Switzerland, for maintenance. The aircraft underwent 1C, 6C and 2,000-flight cycle checks. During the inspections, AMAC Aerospace’s team found heavy corrosion on the stabilizers.
-
AMAC Aerospace Turkey: Accomplished Maintenance on 3x Dassault Falcon 2000EX EASy Aircraft
In mid-October, AMAC Aerospace Turkey, Istanbul, welcomed 3x Dassault Falcon 2000EX EASy aircraft from a long term customer.
-
AMAC Aerospace Turkey: Line Maintenance and Defect Rectification Performed on Dassault Falcon 900EX EASy
A Dassault Falcon 900EX EASy belonging to a long term customer arrived at AMAC Aerospace’s hangar in Istanbul, Turkey, for a 150-250-hour engine inspection. The engine generator brushes were also inspected and the three generator brushes were replaced because they were approaching the worn-out limit.
-
JCB Aero: Maintenance Inspection, Landing Gear Replacement and Cabin Refurbishment on Airbus A319
At the end of September, JCB Aero completed maintenance of an Airbus A319 at the hangar in Auch, France. The aircraft underwent a 6- and 12-month inspection, as well as cabin refurbishment. The carpet was replaced and a divan was refurbished in collaboration with AMAC Aerospace Basel, Switzerland.
-
AMAC Aerospace Turkey: Maintenance Conducted in Ankara on 2x Dassault Falcon 900EX EASy
At the beginning of October, AMAC Aerospace’s Istanbul team performed maintenance on two Dassault Falcon 900EX EASy aircraft in Ankara, Turkey.
-
180-Month Inspection and Starlink Installation on Bombardier Global XRS
AMAC Aerospace welcomed a new customer’s Bombardier Global XRS to the hangars in Basel, Switzerland. AMAC Aerospace’s skilled team performed a 180-month inspection of the aircraft along with a Starlink installation.
Show more
Loading...